709DCDA-OSY-CFM 3/4NYC 6
Part of the 709DCDA Series
Ordering Code: 88007512
UPC: 098268223897
6 In Cast Iron Double Check Detector Assembly Backflow Preventer, OSY Shutoffs, Cu Ft Meter, 3/4 IN Bypass, NYC Approved Meter, Pre-drilled Bolts, ArmorTek Coating
This 6 inch double check valve backflow preventer assembly is designed to prevent the reverse flow of contaminated water of non-potable quality from being pumped or siphoned into the potable water supply due to backsiphonage and or backpressure. It is ideal for protection at cross-connections identified as non-health hazard applications and contaminants found at the service line entrance. This assembly consists of a fused epoxy coated cast iron body using ArmorTek(TM) coating technology for advanced corrosion resistance construction, OSY resilient seated gate valves, test cocks, and a modular check design with center stem guide. The captured spring is accessible through a bolted cover plate. This NYC version comes with an NYCDEP approved CFM meter and four sets of 304SS bolts/nuts with a 1/4 inch hole drilled axially through the bolt. The coating on this backflow assembly uses ArmorTek technology to resist corrosion due to microbial induced corrosion (MIC) or exposed metal substrate.
- Utilizes advanced ArmorTek coating technology to resist corrosion of internals
- The valve body shall utilize a coating system with built in electrochemical corrosion inhibitor and microbial inhibitor
- Modular check assemblies
- Detector bypass with NYCDEP approved meter
- Drilled bolts to eliminate flange drilling
Specifications | |
---|---|
ArmorTekTechnology | Yes |
BodyFinish | Epoxy Coated Using ArmorTek Technology |
BuyAmericanAct | NO |
EANUCCCode | 098268223897 |
MaximumTemperature-Fahrenheit | 110 |
MaximumWorkingPressure-BAR | 12.10 |
MaximumWorkingPressure-PSI | 175 |
MinimumTemperature-Celsius | 0.50 |
MinimumTemperature-Fahrenheit | 33 |
TrademarkName-Primary | None |